Major SMT components!

Posted on August 22, 2013 by Jorge Maornla

The conventional form of fitting components on the circuit board has completely changed in this modern era. The through-hole method has been revolutionized by the modern method called surface mount technology.

Surface mount devices or SMD’s made through SMT process comprise different types of components which are very small in size, have short pins, leads, flat contacts and BGA’s. Following is the categorization of SMD devices:

Passive SMD: This comprise of various resistors or capacitors which are of different package sizes like: 1812, 1206, 0805, 0603, 0402, and 0201. These sizes are based on the dimensions of hundreds of an inch. Depending on the size levels of resistors and capacitors they are also differentiated on the basis of the use of application.

What Qualities Does a Good PCB Service Provider Should have?

Posted on August 8, 2013 by Jorge Maornla

To get top notch quality products, it’s vital to look out for a reliable service provider who can meet up your demands.

Though searching out a provider is quite a daunting task because of the availability of hoard of providers. So, in such a case, you must keep the following points in mind that would make your task easier, as well as let you know what qualities a good service provider must have:

A distributor always makes a note to listen to its customers first and then give his remarks.

Quote

Posted on July 31, 2013 by Jorge Maornla

Printed circuit boards are the heart of any electronic machine, and each PCB is crafted as per the demands of the electronic, that is its desired functions and utility.The quality of any particular printed circuit board is determined by the quality of its components.

Here’s a detailed account of the kind of components that go into making a PCB:
There are two basic types of components:

Passive components

Capacitors and resistors are the prime example of passive PCB components. These are the components that run without a power source. They are used stabilize or limit the flow of current in the PCB.

What Makes Surface Mount Technology So popular?

Posted on July 24, 2013 by Jorge Maornla

Printed circuit boards are installed in every device manufactured by electronics industry. Several components are placed on PCB’s so that an electronic device or a gadget can work properly. Different ways are used to design a printed circuit board.

But, surface mount construction is widely used as a large number of benefits are associated with it. It is a method in which components are directly placed on the board, eliminating need for drilling holes to place the elements accurately on the board.

Few Tips on PCB Fabrication

Posted on July 19, 2013 by Jorge Maornla

Printed circuit boards provide a base to electronic equipment, are made of thing boards of insulating material (typically a surface with metal coating) on one side or sometimes, on both sides of the surface.

The PCBs are responsible for the correct functioning of the device. Therefore, the designing and implementation of these basic building blocks is important. All assembling techniques should be followed in correct manner otherwise all your efforts will get failed.

Mentioned below are some important tips to produce the correct base for the electronic equipment:

Know More about Electronic Assembly Manufacturing

Posted on July 10, 2013 by Jorge Maornla

Designing a printed circuit board is a complex procedure as a number of stages are involved in developing different types of single and multi-layered boards. To create a fully functional board, various components are attached to it.

The services provided by electronic assembly manufacturing companies are important for electronics industry as all the devices and gadgets are equipped with printed circuit boards with different circuitries.

Now, let’s have a look at the most significant electronic components attached to a PCB that are as follow

How has Selecting SMT Benefited Common Day Electronic Manufacturing?

Posted on July 4, 2013 by Jorge Maornla

Printed circuit board manufacturing is like the building block to forming good electronic gadgets. There is dire need for understanding the fact that selecting a feasible method to make the PCBs would be ideal.

Surface mount technology, is one of such methods that can be trusted for state of art printed circuit board manufacturing. Those manufacturers who have relied on this method for their PCB manufacturing have seldom been disappointed. There are a number of qualities that are exhibited by SMT.

What Benefits Does SMT Offer?

Posted on June 19, 2013 by Jorge Maornla

There are a number of methods for printed circuit board manufacturing methods that are being used in the industry. However, SMT has become one of the best methods for PCB manufacturing. It is evident that there are a number of reasons why SMT is one of the best in the industry.
Here’s why:
Cost affectivity: Surface Mount Technology is one of the best in the league and one of the major reasons for the same is the cost affectivity factor that it delivers. SMT is relatively easy to acquire, and doesn’t cost as much as the earlier methods of printed circuit board manufacturing did.
Flexibility: SMT can be used for various applications in the PCB manufacturing industry, due to its versatile feature. This is another reason why the use of this technique has increased manifold in recent years.
Simple process: The process of SMT is easy as compared to the earlier methods such as point to point and thru hole. This is because there used to be drilling of holes through the PCB boards in order to solder the wires and connections, whereas this doesn’t need to be done in case of SMT.

Why is the use of SMT growing?

Posted on June 8, 2013 by Jorge Maornla

The common day SMT technique has made it possible for the process of PCB assembly to become streamlined and approachable. Amongst the many different modes of printed circuit board assembly, this is the most novel and advanced technique, hence it is being used across the world.

It is one of the most widely used techniques for the purpose of PCB assembly and the reasons for the same are:

Cost affectivity- SMT has proven to the cost effective as compared to the older methods of PCB assembly. The point to point and thru-hole methods have long been used in the industry, but are considered to be costlier; hence the introduction of SMT technique was able to save so much money for electronic manufacturers.

Things to Keep Mind while Choosing a Printed Circuit Board Service Provider!

Posted on March 21, 2013 by Jorge Maornla

It’s true that with the advancement of technology and the rise of new and innovative brands in the market, it has become all the more difficult for users to choose a service provider that befits their different needs and requirements in the best possible manner.

Though choosing the right vendor might be as difficult as finding a needle from haystack, you can make the task easier if you just kept in mind a few requisites.

The first step should be to acquire a list of the service providers in your vicinity, which would make it possible for you to choose according to your specific needs and preferences. Once you have short-listed a couple of names from the league, you need to make sure that the firm you are going to choose provides you with quality products and services at cost effective rates.